GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 787699  Size: SH
  1. Lower the screen from the console.

  2. Object Number: 787693  Size: SH
  3. Remove the dome light lens cover.

  4. Object Number: 787700  Size: SH
  5. Remove the bulbs from the dome light.

  6. Object Number: 787699  Size: SH
  7. Remove the screws from behind the screen.

  8. Object Number: 787690  Size: SH
  9. Remove the screws from the dome light.

  10. Object Number: 787701  Size: SH
  11. Disconnect the electrical connectors from the overhead console.

  12. Object Number: 787705  Size: SH
  13. Remove the overhead console from the headliner.

Installation Procedure


    Object Number: 787701  Size: SH
  1. Connect the electrical connectors to the console.

  2. Object Number: 787690  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the dome light.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 787699  Size: SH
  5. Install the screws to the rear of the DVD screen.
  6. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 787700  Size: SH
  7. Install the bulbs in the dome light.

  8. Object Number: 787693  Size: SH
  9. Install the dome light lens cover.

  10. Object Number: 787699  Size: SH
  11. Raise the screen and lock the screen into place.