Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you review the operation and perform the necessary inspections?
| --
|
Go to Step 2
| Go to
Symptoms
|
2
|
- Set the mirror select switch to the LEFT or RIGHT position, as
needed.
- If the left mirror is inoperative, probe with a test lamp between
the outside rearview mirror remote control switch connector terminals G
and H. Refer to
Circuit Testing
in Wiring Systems.
- If the right mirror is inoperative, probe with a test lamp between
the outside rearview mirror remote control switch connector terminals A
and C. Refer to
Circuit Testing
in Wiring Systems.
- While observing the test lamp, press the mirror position switch
to the UP position.
Does the test lamp illuminate?
| --
|
Go to Step
3
|
Go to Step
4
|
3
|
- Using a test lamp, probe between the inoperative outside rearview
mirror connector terminals B and C. Refer to
Circuit Testing
in Wiring Systems.
- Press the mirror position switch to the UP position while observing
the test lamp.
Does the test lamp illuminate?
| --
|
Go to Step
5
|
Go to Step
6
|
4
| Replace the outside rearview
mirror remote control switch. Refer to
Door Trim Plate Replacement
.
Is the repair complete?
| --
|
Go to Step
7
| --
|
5
| Replace the mirror motor pack. Refer to
Outside Rearview Mirror Motor Replacement
.
Is the repair complete?
| --
|
Go to Step
7
| --
|
6
|
- If the left mirror is inoperative repair the poor connection or
open in circuit 88. Refer to
Connector Repairs
or
Wiring Repairs
in Wiring Systems.
- If the right mirror is inoperative repair the poor connection
or open in circuit 1498. Refer to
Connector Repairs
or
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
|
Go to Step
7
| --
|
7
| Operate the system in order to verify the repair.
Did you correct the condition?
| --
| System OK
|
Go to Step
2
|
