Important: 

1. Inspect that the keyless entry transmitter is the correct model for the vehicle remote system. A wrong model transmitter may pass this test, but will not activate the vehicle remote system.
2. Inspect that the transmitter is synchronized with the vehicle. Refer to Transmitter Synchronization .

Did you perform the keyless entry diagnostic system check?

--

Go to Step 2

Go to Diagnostic System Check - Remote Keyless Entry

1. Turn ON the J 43241 .
2. Place the transmitter on the J 43241 test pad.
3. Press each button of the transmitter one at a time.

Does a tone sound and the green light illuminate on the J 43241 after each button is pressed?

--

Transmitter OK

Go to Step 3

Do any of the buttons on the transmitter sound the tone and illuminate the green light when pressed?

--

Go to Step 6

Go to Step 4

Replace the transmitter battery. Refer to Transmitter Battery Replacement .

Did you complete the replacement?

--

Go to Step 5

--

1. Turn ON the J 43241 .
2. Place the transmitter on the J 43241 test pad.
3. Press each button of the transmitter one at a time.

Does a tone sound and the green light illuminate on the J 43241 after each button is pressed?

--

Go to Step 7

Go to Step 6

Replace the transmitter. Refer to Transmitter Programming .

Did you complete the replacement?

--

Go to Step 8

--

Operate the transmitter within the range of the vehicle.

Do the vehicle functions operate normally?

--

Transmitter OK

Go to Step 8

Perform the Synchronization Procedure. Refer to Transmitter Synchronization .

Did you complete the synchronization?

--

Transmitter OK

--