Did you perform the driver information display diagnostic system check?

--

Go to Step 2

Go to Diagnostic System Check - Driver Information Systems

Turn ON the ignition, with the engine OFF.

Make sure you are in any of the 7 DID modes except OFF.

During bulb check does the Driver Information Display (DID) light up?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Important: Perform the set up procedure for the replacement DID.

Replace the DID. Refer to Driver Information Center Replacement .

Is the repair complete?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2