GM Service Manual Online
For 1990-2009 cars only

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. Tests for an open in the BCM battery positive voltage circuit(s) and the ignition voltage circuit(s).

  2. Tests for an open in the BCM ground circuit(s).

Step

Action

Value(s)

Yes

No

Schematic Reference: Body Control System Schematics

1

Did you preform the BCM Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Body Control System

2

Test the battery positive voltage circuit(s) and the ignition voltage circuit(s) of the BCM for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Diagnostic System Check - Body Control System

Go to Step 3

3

Test the ground circuit(s) of the BCM for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Diagnostic System Check - Body Control System

Go to Step 4

4

Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Diagnostic System Check - Body Control System

Go to Step 5

5

Replace the BCM. Refer to Body Control Module Replacement .

Is the repair complete?

--

Go to Diagnostic System Check - Body Control System

--