Step
| Action
| Value(s)
| Yes
| No
|
DEFINITION: The roof rail reading lamps stay illuminated when all of
the following conditions exist:
| • | All of the doors are closed. |
| • | The instrument panel (IP) dimmer switch is off. |
| • | The roof rail reading lamp switches are off. |
| • | The interior lamps override switch is on (the interior lights
are enabled). |
| • | None of the interior lighting modes are activated. |
The inadvertent load (battery rundown) protection turns off the roof
rail reading lamps after 10 minutes. This action will occur after
3 minutes on vehicles with less than 24 accumulated km
(15 miles).
|
1
| Did you perform the Lighting Systems Diagnostic System Check?
| --
| Go to
Step 2
| Go to
Diagnostic System Check - Lighting Systems
|
2
|
- Close all of the doors.
- Turn off the IP dimmer switch.
- Turn the ignition switch to the RUN position.
- Turn on the interior lamps override switch (interior lights enabled).
- Cycle the switches for the windshield header courtesy/reading
lamps between the ON position and the OFF position.
Do the windshield header courtesy/reading lamps turn OFF?
| --
| Go to
Step 4
| Go to
Step 3
|
3
| Replace the roof rail reading lamps
assembly.
Did you complete the repair?
| --
| Go to
Step 4
| --
|
4
|
- Turn the ignition switch to the LOCK position.
- Reinstall the connectors/components previously removed.
- Operate the system in order to verify the repair.
Did you correct the condition?
| --
| System OK
| Go to
Step 2
|
