GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Montana 🢒 Engine 🢒 Engine Electrical 🢒 Auxiliary Air Conditioning (A/C) Control Assembly Replacement - Front

Removal Procedure

    Object Number: 318106 Size: SH
  1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges and Console.

    2. Object Number: 318109 Size: SH
  2. Remove the bolts/screws from the switch bank to instrument panel.
  3. Pull straight out from the instrument panel in order to remove the switch bank from the instrument panel.

    4. Object Number: 318110 Size: SH
  4. Disconnect the electrical connectors.

Installation Procedure

    Object Number: 318110 Size: SH
  1. Connect the electrical connectors.
  2. Push in on the switch bank in order to install the switch bank.

    3. Object Number: 318109 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts/screws to the switch bank to instrument panel.

    4. Tighten
    Tighten the bolts/screws to 2.5 N·m (22 lb in).


    Object Number: 318106 Size: SH
  4. Install the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges and Console.