Tools Required

J 41712 Oil Pressure Sensor Socket

1. If necessary, remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
2. Disconnect the oil pressure sensor electrical connector (4).



3. Using J 41712 , remove the oil pressure sensor (706) and washer (707).

1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers .

Notice: Refer to Fastener Notice in the Preface section.

2. Using J 41712 , install the oil pressure sensor (706) and washer (707).

Tighten
Tighten the sensor to 35 N·m (26 lb ft).




3. Connect the oil pressure sensor electrical connector (4).
4. If necessary, install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .