Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Arm the content theft system. Refer to Content Theft Deterrent (CTD) Description and Operation . Does the security indicator LED illuminate? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the security indicator LED illuminate? | Go to Step 6 | Go to Step 4 |
4 |
Does the test lamp light? | Go to Step 5 | Go to Step 8 |
5 | Test the security indicator LED control circuit for an open or short to ground. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 11 | Go to Step 7 |
6 | Inspect for poor connections at the harness connector of the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 11 | Go to Step 9 |
7 | Inspect for poor connections at the harness connector of the security indicator LED. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs. Did you find and correct the condition? | Go to Step 11 | Go to Step 10 |
8 | Repair the open in the security indicator control ground circuit. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 11 | -- |
9 | Replace the BCM. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 11 | -- |
10 | Replace the security indicator LED. Refer to LED Indicator Replacement - Vehicle Security System . Did you complete the replacement? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
