GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

Schematic Reference: Exterior Lights Schematics

Connector End View Reference: Master Electrical Component List

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

2

Place the hazard switch in the OFF position.

Do the hazard lamp remain ON continuously?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections

3

Disconnect the multifunction turn signal switch.

Do the hazard lamps turn OFF?

Go to Step 6

Go to Step 4

4

Test for a short to ground in the hazard switch signal circuit. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 7

Go to Step 5

5

Replace the body control module (BCM). Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 7

--

6

Replace the multifunction turn signal switch. Refer to Turn Signal Multifunction Switch Replacement .

Did you complete the repair?

Go to Step 7

--

7

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2