GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Grand Prix 🢒 Restraints 🢒 Seat Belts 🢒 Child Restraint Tether Anchor Replacement

Removal Procedure

    Object Number: 596225 Size: SH
  1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  2. Remove the screws from the child seat tether brackets.
  3. Remove the child seat tether brackets from the rear shelf.

Installation Procedure

    Object Number: 596225 Size: SH
  1. Position the child seat tether brackets to the slot in the rear shelf.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws to the child seat tether brackets.

    3. Tighten
    Tighten the screws to the child seat tether brackets to 20 N·m (15 lb ft).

  3. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .