GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1277001  Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Remove the seat back. Refer to Rear Seat Back Replacement .
  3. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  4. If you are removing a side retractor, remove the retractor anchor bolt from the floor pan.

  5. Object Number: 371964  Size: SH
  6. Remove the retractor bolt.
  7. Remove the rear seat retractor from the vehicle.

Installation Procedure


    Object Number: 157291  Size: SH
  1. Position the rear seat retractor in the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

    Important: Position the retractor alignment tabs.

  3. Install the rear seat retractor bolt.
  4. Tighten
    Tighten the bolt to 45 N·m (33 lb ft).


    Object Number: 1277001  Size: SH
  5. If you are installing a side retractor, install the retractor side belt anchor bolt to the floor pan.
  6. Tighten
    Tighten the bolt to 42 N·m (31 lb ft).

  7. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  8. Install the rear seat back . Refer to Rear Seat Back Replacement .
  9. Install the seat cushion. Refer to Rear Seat Cushion Replacement .