Important: Always maintain cleanliness when servicing fuel system components.

1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
2. Disconnect the fuel level sensor electrical connector (1).



3. Push in the fuel level sensor retainer (1).



4. Slide the fuel level sensor (1) downward and off of the bucket.

1. Slide the fuel level sensor (1) onto the bucket and upward.



2. Slide the fuel level sensor upward until the retainer (1) locks.



3. Connect the fuel level sensor electrical connector (1).
4. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .