Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
2. Use J 38778 to disengage the clips on the carpet retainer section.
3. Pull out on the panel to disengage the top clip.
4. Remove the rear quarter lower trim panel from the vehicle.

1. Position the rear quarter lower trim panel in the vehicle.
2. Install the upper clip to the trim panel by pressing into place until fully seated.
3. Install the carpet retainer section by pressing down until the clip is fully seated.
4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .