| Table 1: | Body Control Module (BCM) |
| Table 2: | Driver Information Center (DIC) |
| Table 3: | Powertrain Control Module (PCM) |
| Table 4: | Engine Control Module (PCM) |
| Table 5: | Instrument Panel Cluster (IPC) |
The scan tool data lists contain all the instrument panel, gage, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with in Vehicle DTC Information.
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Key in Ignition | Inputs | Yes/No | Yes |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Display Backlighting Level | DIC Data | % | Varies |
Display Odometer Switch | Input/Output | Yes/No | Yes |
Fuel Switch | Input/Output | Yes/No | Yes |
Gauge Switch | Input/Output | Yes/No | Yes |
Options Switch | Input/Output | Yes/No | Yes |
Reset Switch | Input/Output | Yes/No | Yes |
Switch Backlighting | DIC Data | % | Varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
Change Oil Now Command | IPC PCM Data | On/Off | Off |
Cruise Control Active | IPC PCM Data | Yes/No | No |
ECT Sensor | IPC PCM Data | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Hot Lamp Command | IPC PCM Data | On/Off | Off |
Engine Oil Life Remaining | IPC PCM Data | % | Varies |
Engine Oil Level Switch | IPC PCM Data | OK/Low | OK |
Engine Oil Pressure Switch | IPC PCM Data | OK/Low | OK |
Engine Speed | IPC PCM Data | RPM | ±100 RPM from Desired Idle Speed |
Engine Speed Circuit Status | IPC PCM Data | Ok/Fault/Fault/Invalid State | Ok |
Fuel Tank Level Remaining | IPC PCM Data | % | Varies w/fuel level |
Fuel Level Sensor | IPC PCM Data | 0-5 V | Varies w/fuel level |
Generator Lamp Command | IPC PCM Data | On/Off | Off |
Ignition 1 Signal | IPC PCM Data | Voltage | 9-19 V |
Low Engine Oil Level Lamp Command | IPC PCM Data | On/Off | Off |
Low EOP Lamp Command | IPC PCM Data | On/Off | Off |
MIL Circuit History | IPC PCM Data | Ok/Open/Short/Invalid State | Ok |
MIL Command | IPC PCM Data | On/Off | On/Off |
Odometer | IPC PCM Data | Miles (Kilometers) | Varies w/selection |
Vehicle Speed Sensor | IPC PCM Data | miles per hour (kilometers per hour) | 0 mph (0 km/h) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
Change Engine Oil Indicator Command | IPC ECM Data | On/Off | Off |
Cruise Control Active | IPC ECM Data | Inactive/Active/Invalid | Inactive |
ECT Sensor | IPC ECM Data | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Oil Pressure Sensor | IPC ECM Data | kPa (psi) | Varies w/oil pressure |
Engine Oil Pressure Sensor | IPC ECM Data | Volts | 0-5 Volts Varies w/oil pressure |
Engine Oil Temperature Calculated | IPC ECM Data | Celsius (Fahrenheit) | Varies w/oil temperature |
Engine Speed | IPC ECM Data | RPM | ±100 RPM from Desired Idle Speed |
Engine Speed Circuit Status | IPC PCM Data | Ok/Incomplete/Short GND/Open/Short B+ | Ok |
Fuel Level Sensor | IPC ECM Data | 0-5 V | Varies w/fuel level |
Fuel Tank Level Remaining | IPC ECM Data | % | Varies w/fuel level |
Ignition 1 Signal | IPC ECM Data | Voltage | 9-18 V |
Ignition Accessory Signal | IPC ECM Data | On/Off | Off |
Low EOP Indicator Command | IPC ECM Data | On/Off | Off |
MIL Circuit Status | IPC ECM Data | Ok/Incomplete/Short GND/Open/Short B+ | Ok |
MIL Command | IPC ECM Data | On/Off | On/Off |
Non-Driven Wheel Speed | IPC ECM Data | miles per hour (kilometers per hour) | 0 mph (0 km/h) |
Odometer | IPC ECM Data | Miles (Kilometers) | Varies Miles (Kilometers) |
Vehicle Speed Sensor | IPC ECM Data | miles per hour (kilometers per hour) | 0 mph (0 km/h) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Park Brake Unapplied | |||
ABS Lamp | Data | On/Off | Off |
Air Bag Lamp | Data | On/Off | Off |
Brake Lamp | Data | Volts | Varies w/fluid level |
Coolant Hot Lamp | Data | On/Off | Varies |
Fog Lamp | Data | On/Off | Off |
Hi Beam Lamp | Data | On/Off | Off |
Km/h Lamp | Data | On/Off | On/Off |
Left Turn Signal | Data | On/Off | Off |
mph Lamp | Data | On/Off | On/Off |
Low Brake Fluid | Data | On/Off | Off |
Low Oil Pressure | Data | On/Off | Off |
Right Turn Signal | Data | On/Off | Off |
Upshift Lamp | Data | On/Off | Off |
VSES Active Lamp | Data | On/Off | On/Off |
