For 1990-2009 cars only
Removal Procedure
- Carefully push the outside rearview mirror face on the inner edge, near the front door window glass, to allow access.
- Insert a large flat-bladed screwdriver in the slot between mirror lens and the mounting base.
- Grasp the mirror face firmly and pull it from the mirror body.
- Remove the outside rearview mirror case from the outside rearview mirror housing and disconnect the heater wire, if equipped.
Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
Installation Procedure
- Install the electric heater wire to the mirror, if equipped.
- Using the palm of your gloved hand, press firmly on the center of the glass until the case seats onto the motor.
- Inspect the mirror for proper operation.
The mirror will make a snapping noise when properly seated.
