GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 330424  Size: MH
  1. Open the rear compartment.
  2. Remove the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement .
  3. Remove the screw (5) from the rear compartment lid ajar/lid lamp switch.
  4. Remove the electric connector.
  5. Remove the rear compartment lid ajar/lid lamp switch.

Installation Procedure


    Object Number: 330424  Size: MH
  1. Position the rear compartment lid ajar switch to the rear compartment lid latch.
  2. Install the electric connector.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the screw (5) to the rear compartment lid ajar/lid lamp switch.
  5. Tighten
    Tighten the rear compartment lid ajar switch screw to 5 N·m (44 lb in).

  6. Install the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement .
  7. Close the rear compartment.