GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1551864  Size: SH
  1. Disconnect the positive crankcase ventilation (PCV) tube from the air inlet duct. Refer to Plastic Collar Quick Connect Fitting Service .

  2. Object Number: 1554558  Size: SH
  3. Loosen the air inlet duct clamp at the throttle body.
  4. Remove the air inlet duct from the throttle body.

  5. Object Number: 1556020  Size: SH
  6. Loosen the air inlet duct clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
  7. Remove the air inlet duct from the MAF/IAT sensor.

Installation Procedure


    Object Number: 1556020  Size: SH
  1. Install the air inlet duct from the MAF/IAT sensor.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the air inlet duct clamp at the MAF/IAT sensor.
  4. Tighten
    Tighten the clamp to 3 N·m (27 lb in).


    Object Number: 1554558  Size: SH
  5. Install the air inlet duct to the throttle body.
  6. Tighten the air inlet duct clamp at the throttle body.
  7. Tighten
    Tighten the clamp to 3 N·m (27 lb in).


    Object Number: 1551864  Size: SH
  8. Connect the PCV tube to the air inlet duct. Refer to Plastic Collar Quick Connect Fitting Service .