GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Grand Prix 🢒 Engine 🢒 Engine Electrical 🢒 Instrument Panel Accessory Trim Plate Replacement

Removal Procedure

    Object Number: 910510 Size: SH
  1. Use a plastic trim tool to remove the ignition switch bezel.

    2. Object Number: 928809 Size: SH
  2. Pull the instrument panel (I/P) accessory trim plate rearward.

    3. Object Number: 928828 Size: SH
  3. Disconnect the electrical connector from the driver information display assembly.
  4. Remove the driver information display screws.
  5. Remove the driver information display.

    6. Object Number: 928622 Size: SH
  6. Remove the I/P center air outlet screws.
  7. Remove the I/P center air outlet.
  8. Remove the I/P accessory trim plate.

Installation Procedure

    Object Number: 928622 Size: SH
  1. Position the I/P center air outlet to the I/P accessory trim plate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the I/P center air outlet screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 928828 Size: SH
  3. Place the driver information display on the I/P accessory trim plate
  4. Install the driver information display screws.

    5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Connect the electrical connector to the driver information display.

    6. Object Number: 928809 Size: SH
  6. Press the I/P accessory trim plate to the I/P.

    7. Object Number: 910510 Size: SH
  7. Install the ignition switch bezel.