GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Grand Prix 🢒 General Information 🢒 General Information 🢒 Torque Converter Cover Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 289471 Size: SH
  2. Remove the torque converter cover bolt(s).
  3. Remove the torque converter cover(s).

Installation Procedure

    Object Number: 289471 Size: SH
  1. Install the torque converter cover(s).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the torque converter cover bolt(s).

    3. Tighten
    Tighten the torque converter cover bolt(s) to 10 N·m (89 lb in).

  3. Lower the vehicle.