GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the case side cover. Refer to Control Valve Body Cover Replacement .
  2. Disconnect the 2-3 shift solenoid electrical connector.
  3. Remove the retaining clip (314C).

  4. Object Number: 49385  Size: SH
  5. Remove the 2-3 shift solenoid (315B).

Installation Procedure


    Object Number: 49385  Size: SH
  1. Install the 2-3 shift solenoid (315B).
  2. Install the retaining clip (314C).
  3. Connect the 2-3 shift solenoid electrical connector.
  4. Install the case side cover. Refer to Control Valve Body Cover Replacement .
  5. Important: It is recommended that transmission adaptive pressure (TAP) information be reset.

    Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.

  6. Reset the TAP values. Refer to Adapt Function .