GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Grand Prix 🢒 Body and Accessories 🢒 Interior Trim 🢒 Instrument Panel Compartment Replacement

Removal Procedure

    Object Number: 311659 Size: SH
  1. Remove the instrument panel (IP) compartment hinge screws.
  2. Open the IP compartment.

    3. Object Number: 311660 Size: SH
  3. Press inward on both sides of the IP compartment housing. Rotate down and out removing the housing from the IP.

Installation Procedure

    Object Number: 311660 Size: SH
  1. Align the compartment housing with the IP.
  2. Press inward on both sides of the compartment housing. Rotate upward and inward to install the housing into the IP.

    3. Object Number: 311659 Size: SH
  3. Hand tighten the IP compartment hinge screws.
  4. Align the IP compartment housing in order to ensure the correct fit.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the IP compartment hinge screws.

    6. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  6. Close the IP compartment.