Front Bumper Lower Fascia Grille Replacement SE

1. Lift the bottom edge of the grille up and out in order to release the lower tabs.
2. Pull down on the grille in order to release the upper grille tabs from the front bumper fascia.
3. Remove the grille from the front bumper fascia.

1. Install the upper grille tabs to the front bumper fascia.
2. Install the lower grille tabs to the front bumper fascia.

Front Bumper Lower Fascia Grille Replacement GT/GTP

1. Remove the screws from the grille.
2. Pull down on the grille in order to release the upper grille tabs from the front bumper fascia.
3. Remove the grille from the front bumper fascia.

1. Insert the grille to the front bumper fascia.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screws the grille.

Tighten
Tighten the grille screws to 2 N·m (18 lb in).