Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
2. Remove the push-in retainers from the rear bumper energy absorber usingJ 38778 .
3. Remove the rear bumper energy absorber from the rear bumper impact bar.

1. Install the rear bumper energy absorber to the rear bumper impact bar.

Important: Route the tail lamp wiring through the cutout in the rear bumper energy absorber.

2. Install the push-in retainers to the rear bumper energy absorber.
3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .