GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 317321  Size: SH
  1. Remove the screws from the front license cover.
  2. Remove the front license cover from the front bumper fascia.

Installation Procedure


    Object Number: 317321  Size: SH
  1. Install the front license cover to the front bumper fascia.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the front license cover.
  4. Tighten
    Tighten the license plate cover screws to 2 N·m (18 lb in).