Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Inspect the STOPLAMP fuse. Is the fuse open? | -- | Go to Step 8 | Go to Step 2 |
2 | Using a test light, backprobe between the stoplamp switch harness connector C1 between terminal A and ground. Does the test light illuminate? | -- | Go to Step 3 | Go to Step 6 |
3 |
Does the test light illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair a poor connection or open in circuit 17 between the stoplamp switch and S205. Has the repair been made? | -- | -- | |
5 | Adjust/Replace the stoplamp switch. Refer to Stop Lamp Switch Adjustment or Stop Lamp Switch Replacement in Hydraulic Brakes. Has the repair been made? | -- | -- | |
6 | Repair the poor connection or open in circuit 140. Has the repair been made? | -- | -- | |
7 | Repair a short to ground in circuit 140. Has the repair been made? | -- | -- | |
8 | Inspect circuit 140 for a short to ground. Is there a short to ground in circuit 140? | -- | Go to Step 7 | Go to Step 9 |
9 | Repair the short to ground in circuit 17. Has the repair been made? | -- | -- |
