Tools Required

J 38536-A Antenna Bezel Socket

1. Remove the antenna mast. Refer to Fixed Antenna Mast Replacement .
2. Open the rear compartment.
3. Reposition the remote compact disc player, if equipped. Refer to Remote Compact Disc Player Replacement .
4. Remove the right side rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.



5. Use the J 38536-A in order to remove the radio fixed antenna bezel retaining nut.



6. Remove the antenna bezel.
7. Disconnect the antenna extension cable from the fixed antenna.
8. Remove the fixed antenna.

1. Install the fixed antenna.
2. Install the antenna bezel
3. Loosely install the antenna bezel retaining nut.
4. Connect the antenna extension cable to the fixed antenna.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




5. Use the J 38536-A in order to tighten the radio fixed antenna bezel retaining nut.

Tighten
Tighten the radio fixed antenna bezel retaining nut to 10 N·m (89 lb in).

6. Install the right side rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
7. Install the remote compact disc player, if equipped. Refer to Remote Compact Disc Player Replacement .



8. Close the rear compartment.
9. Install the antenna mast. Refer to Fixed Antenna Mast Replacement .