1. Turn the headlamp switch to the HEAD position.
2. Turn the headlamp dimmer switch to the HIGH position.

Is the high beam indicator in the instrument cluster ON?

--

Go to Step 3

Go to Step 2

1. Inspect circuit 11 for a poor connection or an open.
2. Inspect circuit 11 for a short to ground.
3. If the circuit is OK, replace the headlamp dimmer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt.

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--

1. Disconnect the underhood electrical center connector C2.
2. Using a test light, probe the underhood electrical center connector C2 terminal F4 to ground.

Does the test light illuminate?

--

Go to Step 4

Go to Step 5

Replace the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring systems.

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--

Repair the poor connection or open in circuit 11 between S219 and the underhood electrical center harness connector C2 terminal F4.

Has the repair been made?

--

Go to Daytime Running Lights (DRL) System Check

--