1

Turn the headlamp switch to the PARK position.

The following lamps are in the ON position:

2

1. Turn the ignition switch to the RUN position.
2. Turn the headlamp switch OFF.
3. Operate the left turn signal switch, and then the right turn signal switch.

The left and right turn and side marker lamps continuously flash ON and OFF.

3

Turn the hazard switch to the ON position.

1. The front and the rear turn lamps continuously flash from the minimum intensity to the maximum intensity.
2. The front and the rear side marker lamps continuously flash from OFF to ON.

4

1. Turn the hazard switch to the OFF position.
2. Turn the headlamp switch to the PARK position.
3. Press the brake pedal.

1. The following lamps are in the ON position:

•	The side marker lamps

•	The park lamps

•	The license lamps

2. The following lamps are ON at the maximum brightness:

•	The center high mounted stoplamp (CHMSL)

•	The tail lamps

5

Release the brake pedal.

The CHMSL turns OFF and the tail lamps go to low intensity.

Stop Lamps Always On

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.