GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Grand Prix 🢒 Engine 🢒 Engine Electrical 🢒 Head Up Display Module Replacement

Removal Procedure
  1. Remove the instrument panel (IP) upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .

    2. Object Number: 311781 Size: SH
  2. Remove the IP head-up display (HUD) module bolts.
  3. Disconnect the electrical connector from the HUD module.
  4. Remove the HUD module from the instrument panel.

Installation Procedure

    Object Number: 311781 Size: SH
  1. Connect the electrical connector to the HUD module.
  2. Install the HUD module to the instrument panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts into the HUD module.

    4. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  4. Install the IP upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .