GM Service Manual Online
For 1990-2009 cars only

Relief Procedure

Tools Required

J 34730-1A , Fuel Pressure Gauge


    Object Number: 180378  Size: SH

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery terminal. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Loosen the fuel filler cap in order to relieve the tank vapor pressure.
  3. Connect the Fuel Pressure Gauge J 34730-1A to the fuel pressure connection. Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure gauge in order to avoid spillage.
  4. Install the bleed hose into an approved container, and open the valve in order to bleed the system pressure. The fuel connections are now safe for servicing.
  5. Drain any fuel remaining in the fuel pressure gauge into an approved container.