Tools Required

1. Use J 37096 in order to hold the flywheel.



2. Remove the crankshaft balancer bolt.



3. Use the J 38197-A in order to remove the crankshaft balancer.

Important: Do not separate the crankshaft pulley from the crankshaft balancer. Service the crankshaft pulley and the crankshaft balancer as an assembly.

3.1.	Invert J 38197-2 so the leg of the tool is facing away from the crankshaft balancer.

3.2.	Install the silver screws J 38197-4 to the crankshaft balancer.

3.3.	Turn J 38197-1 to remove the crankshaft balancer from the crankshaft.

3.4.	Remove J 38197-1, J 38197-2, and J 38197-4 from the crankshaft balancer.