Drive Belt Idler Pulley Replacement Upper

1. Remove the supercharger drive belt. Refer to Drive Belt Replacement .



2. Remove the idler pulley bolt.
3. Remove the drive belt idler pulley.

1. Install the drive belt idler pulley.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the idler pulley bolt.

Tighten
Tighten the idler pulley bolt to 50 N·m (37 lb ft).




3. Install the supercharger drive belt. Refer to Drive Belt Replacement .

Drive Belt Idler Pulley Replacement Lower

1. Remove the supercharger drive belt. Refer to Drive Belt Replacement .



2. Remove the idler pulley bolt.
3. Remove the drive belt idler pulley.

1. Install the drive belt idler pulley.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the idler pulley bolt.

Tighten
Tighten the idler pulley bolt to 50 N·m (37 lb ft).




3. Install the supercharger drive belt. Refer to Drive Belt Replacement .