GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the oil pan. Refer to Oil Pan Replacement .
  2. Remove the oil pump and the oil pump drive.

  3. Object Number: 105920  Size: SH
  4. Remove the crankshaft oil deflector nuts.
  5. Remove the crankshaft oil deflector.

Installation Procedure


    Object Number: 105920  Size: SH
  1. Install the crankshaft oil deflector.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the crankshaft oil deflector nuts.
  4. Tighten
    Tighten the crankshaft oil deflector nuts to 25 N·m (18 lb ft).

  5. Install the oil pump drive and the oil pump.
  6. Install the oil pan. Refer to Oil Pan Replacement .