GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Grand Am 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Wheel Control Switch Assembly Replacement

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.

    2. Object Number: 737465 Size: SH
  2. Remove the steering wheel control switches from the steering wheel pad using a small flat-bladed tool.

    3. Object Number: 737466 Size: SH
  3. Disconnect the electrical connector from the steering wheel control switches.
  4. Remove the steering wheel control switches from the steering wheel.

Installation Procedure

    Object Number: 737466 Size: SH
  1. Connect the electrical connector to the steering wheel control switch.
  2. Position the steering wheel control switches to the steering wheel pad.

    3. Object Number: 737467 Size: SH
  3. Install the steering wheel control switches to the steering wheel pad pressing into place until fully seated.
  4. Inspect the operation of the steering wheel control switches.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.