GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 652041  Size: SH
  1. Use a small flat-bladed tool on the retainer in order to release the power accessory receptacle housing from the lower instrument panel (I/P).

  2. Object Number: 652043  Size: SH
  3. Remove the power accessory receptacle housing from the lower I/P.

  4. Object Number: 652045  Size: SH
  5. Release the electrical connector retainer tabs from the power accessory receptacle.

  6. Object Number: 652047  Size: SH
  7. Disconnect the electrical connector from the power accessory receptacle.
  8. Remove the retainer and the housing from the bezel, if necessary.

Installation Procedure


    Object Number: 652047  Size: SH
  1. Install the retainer and the housing to the bezel, if necessary.
  2. Connect the electrical connector to the power accessory receptacle.

  3. Object Number: 652042  Size: SH
  4. Position the power accessory receptacle housing to the lower I/P.

  5. Object Number: 652056  Size: SH
  6. Install the power accessory receptacle housing into the lower I/P. Press the housing into place until fully seated.
  7. Inspect the power accessory receptacle for proper operation.