Digital Radio Antenna Replacement U2K

1. Lower the front of the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
2. Disconnect the antenna cables from the antenna base cable connectors.
3. Remove the antenna base bolt (2).



4. Disengage the retainers at the inside of the roof.
5. Remove the antenna base assembly.

1. Route the base antenna cables through the roof opening.



2. Locate the antenna base to the roof with the alignment pin (2).

Notice: Refer to Fastener Notice in the Preface section.

3. Secure the antenna base to the roof with the bolt.

Tighten
Tighten the antenna base bolt to 6 N·m (53 lb in).

4. Connect the antenna cables to the antenna base cable connectors.
5. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.