GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Grand Am 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Washer Solvent Level Switch Replacement

Removal Procedure
  1. Remove the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.

    2. Object Number: 793941 Size: SH
  2. Disconnect the washer solvent container level sensor electrical connector.

    3. Object Number: 793942 Size: SH

    Important: The washer solvent will drain from the washer solvent container when the washer solvent container level sensor is removed. Place a suitable drain pan under the container before removing the washer solvent container level sensor.

  3. Using a small flat-bladed tool, remove the washer solvent container level sensor from the washer solvent container.
  4. Remove the seal from the washer solvent container.

Installation Procedure

    Object Number: 793942 Size: SH
  1. Position the seal to the washer solvent container pressing in until fully seated.
  2. Position the washer solvent container level sensor to the washer solvent container pressing in until fully seated.

    3. Object Number: 793941 Size: SH
  3. Connect the washer solvent container level sensor electrical connector.
  4. Install the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  5. Fill the washer solvent container with washer solvent.