Removal Procedure
- Remove the finish plug from the front door trim panel.
- Remove the screws (3) from the lower pull cup (2).
- Pull downward on the lower pull cup (2) to remove from the door trim panel.
Drivers side shown, passenger side similar.
Installation Procedure
- Install the lower pull cup (2) to the door trim panel.
- Install the screws (3) to the lower pull cup (2).
- Install the finish plug to the door trim panel.
Drivers side shown, passenger side similar.
Press the lower pull cup (2) into the door trim panel until retaining clips are engaged.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws to 3 N·m (27 lb in).
Press the finish plug into place until fully seated.
