For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Scribe the strut to the knuckle. Refer to Strut and Knuckle Scribing in Front Suspension.
- Remove the strut mount to body nut (1) in the trunk area.
- Remove the strut bolts (3) from inside the fender well.
- Remove the strut knuckle bolts (5) and nuts (3) from the strut (1).
- Remove the strut (1) from the vehicle.
Installation Procedure
- Loosely install the strut to knuckle bolts (5) and nuts (3).
- Install the strut to body bolts (3) inside the fender well.
- Install the strut mount to body nuts (1) in the trunk area.
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
- Check the wheel alignment. Refer to Wheel Alignment Measurement in Wheel Alignment.
Important: Align the scribe marks in order to ensure proper alignment.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
| • | Tighten the nuts to 25 N·m (18 lb ft). |
| • | Tighten the strut to knuckle nuts to 120 N·m (89 lb ft). |
