Notice: In order to avoid oil pan damage and possible engine failure, insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support.

1. Support the engine at the oil pan with a floor jack and a block of wood .
2. Remove and position cruise control module aside.



3. Remove the engine mount to engine mount bracket bolts.



4. Remove the engine mount to body nuts.
5. Remove the engine mount.

1. Install the engine mount to the vehicle.



2. Install the engine mount to body nuts.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the engine mount to engine mount bracket bolts.

Tighten

•	Tighten the nuts to 66 N·m (49 lb ft).

•	Tighten the bolts to 130 N·m (96 lb ft).

4. Install the cruise control module to bracket.



5. Remove the floor jack.