CAMSHAFT LOBE LIFT SPECIFICATIONS (CORRECTION)

CAMSHAFT LOBE LIFT

Models Affected: 1985 THROUGH 1988 2.5L ENGINE ----------------- SPECIFICATIONS FOR 6000, GRAND AM AND FIERO MODELS This bulletin is being revised to correct the metric conversion for the camshaft lobe lift.

SERVICE MANUAL UPDATE

In the engine specifications charts near the end of the 2.5L engine section, change Camshaft Lobe Lift to:

.232 inches, 5.8928 mm

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.