Engine Mount Replacement Coupe

1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
2. Remove the engine splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement .
3. Remove the engine mount to engine mount bracket nuts.
4. Remove the engine mount to frame nuts.
5. Using an adjustable jack, raise the engine.
6. Remove the engine mount from the frame.

1. Position the engine mount onto the frame
2. Lower the engine using the adjustable jack.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the engine mount to frame nuts.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

4. Install the engine mount to engine mount bracket nuts.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

5. Remove the adjustable jack from under the vehicle.
6. Install the engine splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement .
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .

Engine Mount Replacement Convertible

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
2. Place a block of wood on a adjustable floor jack, and place the jack under the oil pan in order to support the engine.
3. Remove the engine mount to engine mount bracket nuts.



4. Remove the engine mount bolts.
5. Remove the engine mount.

1. Place the engine mount into position on the engine compartment side rail.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the engine mount bolts.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).




3. Install the engine mount to engine mount bracket nuts.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

4. Remove the floor jack and block of wood from under the oil pan.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.