Preliminary Procedures

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

1

Toe Link to Knuckle Bolt/Nut

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Use the J 45059 to tighten to specification.

Tighten
110 N·m (81 lb ft) + 70 degree rotation

Special Tools

J 45059 Angle Meter

2

Toe Link to Support Bolt/Nut

Tighten
110 N·m (81 lb ft)

3

Toe Link

Tip