GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Preface 🢒 Cautions and Notices 🢒 Body Rear Corner Upper Garnish Molding Replacement

Body Rear Corner Upper Garnish Molding Replacement Coupe


Object Number: 1642683 Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Rear Quarter Upper Trim Panel Assembly

2

Rear Quarter Upper Trim Panel Retainer Clips (Qty: 3)

Body Rear Corner Upper Garnish Molding Replacement Sedan

Removal Procedure

    Object Number: 1283406 Size: SH
  1. Disable the roof rail SIR system, if equipped. Refer to SIR Disabling and Enabling .
  2. Remove the lower lock pillar trim panel. Refer to Body Lock Pillar Lower Trim Panel Replacement .
  3. Remove the garnish trim fastener cover.
  4. Remove the garnish trim fastener.

    5. Object Number: 1171405 Size: SH
  5. Starting at the bottom, remove the garnish trim by pulling straight out.

Installation Procedure

    Object Number: 1171405 Size: SH
  1. Install the garnish trim into the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the garnish trim fastener.

    3. Tighten
    Tighten the fastener to 3 N·m (26 lb in).


    Object Number: 1283406 Size: SH
  3. Install the trim fastener cover.
  4. Install the lower lock pillar trim panel. Refer to Body Lock Pillar Lower Trim Panel Replacement .
  5. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling .