Each cylinder is serviced by 2 hoses:
| • | The rod end (1) |
| • | The closed end (2) |
This is a view of the manifold plate on the hydraulic pump. The hoses and plate are numbered to identify their correct locations.
This is a view of the folding top cylinder valve located in the front left of the rear compartment. The hoses and valve body are numbered to identify their correct locations.
Each hose has an identification number stamped on the cylinder side and on the pump side near the connection point. Corresponding numbers are also stamped on the pump manifold plate to aid in identification.
The following chart identifies the hose that supplies fluid to each specific cylinder.
Hydraulic Cylinders | Hose Location and Number | |
|---|---|---|
Rod End | Closed End | |
Folding Top Main Hydraulic Cylinder Hose to Valve Assembly | 11 - Left 13 - Right | 12 - Left 14 - Right |
Main Hydraulic Cylinder Hose from Valve Assembly to Pump | 11 / 13 | 12 / 14 |
Storage Compartment Lid Rear Hinge Hydraulic Cylinder Hose | 21 | 22 |
Front Roof Latch Hydraulic Cylinder Hose - 2 Piece with Quick Connect | 51 | 52 |
Storage Compartment Lid Front Hinge Hydraulic Cylinder Hose | 31 - Left 33 - Right | 32 - Left 34 - Right |
Storage Compartment Lid Rear Hinge Lower Hydraulic Cylinder Hose | 41 | 42 |
