Tools Required

J 45025 Torque Wrench Adapter

1. Remove the drive belt. Refer to Drive Belt Replacement .
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.

1. Position the drive belt tensioner. Ensure that the tensioner is flush with the front cover.

Notice: Refer to Fastener Notice in the Preface section.

Important: In order to obtain the proper torque when using any torque wrench adapter you must use the following formula: Pre-set Torque = Torque Wrench Length x Torque Desired divided by Torque Wrench Length + Extension Length.

2. Install the drive belt tensioner bolt.

Using the J 45025 tighten the drive belt tensioner bolt.

Tighten
Tighten the bolt to 45 N·m (33 lb ft).

3. Install the drive belt. Refer to Drive Belt Replacement .