Catalytic Converter Replacement - Left Side LY7

Caution: Refer to Exhaust Service Caution in the Preface section.

Caution: Refer to Protective Goggles and Glove Caution in the Preface section.

1. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side .
2. Remove the left catalytic converter to exhaust manifold nuts (1).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



4. Disconnect the bank 2 sensor 2 heated oxygen sensor (HO2S) electrical connector (3) from the engine wiring harness electrical connector (3).



5. Remove the left catalytic converter (3) to right catalytic converter (1) nuts (2).



6. Remove the left catalytic converter from the vehicle.
7. Discard the catalytic converter to exhaust manifold gasket (2).
8. Discard the left catalytic converter to right catalytic converter gasket (1).

1. Install a NEW catalytic converter seal (2) onto the catalytic converter.
2. Install the catalytic converter to the vehicle.
3. Install a NEW left catalytic converter to right catalytic converter gasket (1).

Notice: Refer to Fastener Notice in the Preface section.




4. Install the left catalytic converter to right catalytic converter nuts (2).

Tighten
Tighten the nuts to 25 N·m (18 lb ft).




5. Connect the bank 2 sensor 2 HO2S electrical connector (3) to the engine wiring harness electrical connector (2).



6. Install the left catalytic converter to exhaust manifold nuts (1).

Tighten
Tighten the nuts to 45 N·m (33 lb ft).

7. Install the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side .
8. Lower the vehicle and inspect for exhaust leaks.