Step | Action | Values | Yes | No |
|---|---|---|---|---|
Schematic Reference: Heated/Cooled Seat Schematics Connector End View Reference: Power Seat Connector End Views | ||||
1 | Did you review the Heated Seat System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the heated seat system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Operate the heated seat switch to the OFF position. Is the heated seat switch indicator illuminated? | -- | Go to Step 6 | Go to Step 4 |
4 |
Is the voltage at or near the specified value ? | 12 V | Go to Step 5 | Go to Step 7 |
5 | Test the heated seat switch signal circuit for a short to voltage. Refer to Wiring Repairs . Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 6 |
6 | Inspect for poor connections at the heated seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 8 |
7 | Inspect for poor connections at the heated seat module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 9 |
8 | Replace the heated seat switch. Refer to Heated Seat Switch Replacement . Did you complete the replacement? | -- | Go to Step 10 | -- |
9 | Replace the heated seat module. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
