For 1990-2009 cars only
Removal Procedure
- Place the module in the full open position.
- Remove the headliner. Refer to Headlining Trim Panel Replacement .
- Disconnect the electrical connector from the motor/actuator.
- Remove the motor. Refer to Sunroof Motor/Actuator Replacement .
- Push the window guides rearward on the track until the guides are positioned against the rear hard stop.
Installation Procedure
- Install the motor. Refer to Sunroof Motor/Actuator Replacement .
- Connect the electrical connector to the motor/actuator.
- Install the headliner. Refer to Headlining Trim Panel Replacement .
- Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process .
- Verify the operation of the sunroof.
